Shandong Xingyu Mechanical Technology Co., Ltd

CHINESE RUSSIAN ENGLISH

Email: info@xingyumachine.com
Tel: +86-533-3125007

Automatic multi-angle cutting machine Home >> Products >> Supporting facilities >> Automatic multi-angle cutting machine

Prestressed concrete hollow slab automatic multi-angle cutting machine

Prestressed concrete hollow slab automatic multi-angle cutting machine is used to cut the prestressed concrete component which have been initially formed and reached a certain strength by the diamond saw blade to cut into the size of any width required by user
More product image

Product Description

 Prestressed concrete hollow slab automatic multi-angle cutting machine

Prestressed concrete hollow slab automatic multi-angle cutting machine is used to cut the prestressed concrete component which have been initially formed and reached a certain strength by the diamond saw blade to cut into the size of any width required by user. It can be widely used in cement products and other industries. The model has the advantages of simple structure , light weight, straight seam, convenient use and high production efficiency .It is a necessary tool for cement products and other industries. 

Use environment of equipment:

     This equipment is suitable to run under the circumstances and conditions specified below:

■Ambient air temperature: -20℃~40℃

■ Humidity: the relative humidity can not exceed 50%, and principle of temperature change is not caused by condensation.

■ Altitude: less than 1000m.

■ Air Pollution: no too much dust, acid gas and other corrosive gases and salt.

■ Installation location should be away from vibration sources,combustible and explosive good,bealso away from electromagnetic interference area.

      

Product Range&Size

Model

DJD400×1200

Technical parameter

Blade Diameter

φ1200mm

Total power

~45kw

Hydraulic pressure

70kg/cm

Cutting speed

0.4m/min

Max. Left and right distance

1450mm

Max. Lateral speed

734m/min

Oil tank volume

80L

Downward cutting speed

0-1m/min

Hydraulic oil

HM-32 or HM-46

Max. Longitudinal speed

24m/min

Water tank volume

1m³

Angular speed

0.64r/min

Saw blade rotating speed

1153r/min

Horizontal stroke

1450mm

Saw blade up and down stroke

480mm

 

 

Total weight

About 6000kg

Production process

Relation Products